|
|
| Turbine Flowmeter |
 The Hedland1100 Turbine Flow Meter is designed to withstand the demands of the most
rigorous flow measurement applications. The meter features a rugged 316 stainless steel
housing and rotor support assembly, CD4MCU stainless steel rotor, and abrasion-resistant
tungsten carbide rotor shaft and journal bearings. The Model 1100 maintains measurement
accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in a
variety of industrial applications. The Model 1100 is standard with a magnetic pick-up which produces a frequency output that is proportional to its volumetric flow rate. When paired with the HB2800 Flow Monitor, this compact system offers local indication of both flow rate and total flow. For further flexibility, Hedland offers electronic options which convert the frequency output to an analog signal for easy electronic integration with most instruments, PLCs, and computers.
|
| | Technical Specs |
| Model |
1100 Turbine Flow Meters |
| Meter bore size |
From 3/8 to 10 inch |
| Ports |
1/2 to 2 inch NPT
3 to 10 inch Victaulic grooved ends |
| Temperature: |
Standard: 165 °C (330 °F) maximum
High Temp: 232 °C (450 °F) maximum
|
| Flow ranges: |
2.27 - 11.36 LPM (0.6 - 3.0 GPM)
up to 1893 - 18927 LPM (500 - 5000 GPM) |
| Accuracy |
Within ±1% of reading |
| Pressure |
5,000 psi (345 bar) maximum |
| Rugged construction |
Body: T316 Stainless steel
Rotor: T416 Stainless steel
Internal supports: Tungsten carbide
Bearings: Tungsten carbide journals
Retaining rings: T303 Stainless steel
Pick-up: Magnetic, Standard
|
| Magnetic pick-up output |
30 millivolts to 3 volts - peak-to-peak
|
| Remarks |
Typical Applications:
Water Cooling Systems
Water Sprinkler Systems
Mobile Chemical Sprayers
Water Cooling - Mining
Irrigation - Agricultural
Water Flood
Oil Recovery
|
|
| | Data sheet |
 Catalogue
|
|
Temperature
Humidity & Dewpoint
Flow
Barometric pressure
CO2 & O2
Level
Weather & Wind
Moisture(Wood, Oil, Gas)
Particle Analyser
miscellaneous
Digital thermometer
