HomeAbout UsProductsContact Us

Turbine Flowmeter

The Hedland1100 Turbine Flow Meter is designed to withstand the demands of the most rigorous flow measurement applications. The meter features a rugged 316 stainless steel housing and rotor support assembly, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and journal bearings. The Model 1100 maintains measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in a variety of industrial applications. The Model 1100 is standard with a magnetic pick-up which produces a frequency output that is proportional to its volumetric flow rate. When paired with the HB2800 Flow Monitor, this compact system offers local indication of both flow rate and total flow. For further flexibility, Hedland offers electronic options which convert the frequency output to an analog signal for easy electronic integration with most instruments, PLCs, and computers.

Technical Specs

Model 1100 Turbine Flow Meters
Meter bore size From 3/8 to 10 inch
Ports 1/2 to 2 inch NPT
3 to 10 inch Victaulic grooved ends
Temperature: Standard: 165 C (330 F) maximum
High Temp: 232 C (450 F) maximum
Flow ranges: 2.27 - 11.36 LPM (0.6 - 3.0 GPM)
up to 1893 - 18927 LPM (500 - 5000 GPM)
Accuracy Within ±1% of reading
Pressure 5,000 psi (345 bar) maximum
Rugged construction Body: T316 Stainless steel
Rotor: T416 Stainless steel
Internal supports: Tungsten carbide
Bearings: Tungsten carbide journals
Retaining rings: T303 Stainless steel
Pick-up: Magnetic, Standard
Magnetic pick-up output 30 millivolts to 3 volts - peak-to-peak
Remarks Typical Applications:
Water Cooling Systems
Water Sprinkler Systems
Mobile Chemical Sprayers
Water Cooling - Mining
Irrigation - Agricultural
Water Flood
Oil Recovery

Data sheet


See also
Dual Pulse Insertion Flow Meter
The Flomec Dual Pulse insertion flow transducer is an innovative design combining well proven technology with the performance enhanced by the use of modern engineering materials to provide a cost effe.....
Turbine Flowmeter II
FLomec Turbopulse Mini and the large Turbopulse turbine series measure flows of low viscosity liquids from 3 to 7,000,000 liters/hr in a range of sizes from 1/4" to 20" (6mm-500mm).

The Turbopu.....
Turbine flowmeter for Gas
Aichi Tokei Turbine gas meters TBZ and TBX series, developed to measure gas consumption of a small boiler, an individual furnace, or other individual gas equipment, are achieved to have high accuracy .....


Featured products

Instrinsically Safe humidity transmitter /
Moisture in Jet Fuel transmitter

Vaisala Anritsu Tokico Sato Sekonic Dickson Isuzu Kobayashi
Dynasonics Ryutai RCM flowmeter Hedland Flowmeter Flomec